- Maintenance Free
Since an automatic stroke adjusting device is featured as standard, there is no need for adjustment at all up until the pads reach their limit of wear.
Further, the pin holes in each part of the brake use oil-less bearings (dry metal), eliminating the need to lubricate the pins with grease, and improving maintainability. - Less Shock, Longer Service Life, and Reduced Noise
With simple construction and a small electromagnet stroke allowed, shock from the stroke of moving parts is reduced and service life is extended. The impact noise when the brake is released or applied is also minimal. - Installation and Removal Simplified
When installing or removing the brake on the foundation, it can be moved in a radial direction from the disc, meaning disassembly is not required. - Highly Reliable
Unlike instant strong excitation type electromagnets, our constant excitation type electromagnet requires no control devices. This means there is no trouble cause by auxiliary devices, making these brakes even more reliable. - Environmental Measures
Asbestos-free linings are equipped as a standard feature.
| Braking Torque | 35.6 N·m to 2080 N·m |
|---|---|
| Time Rating | Continuous |
| Actuation Frequency/Utilization Ratio | 1200 times/h, 100% ED |
| Rated Voltage | Single-phase AC power supply: 100V 50/60Hz, 110V 60Hz 200V 50/60Hz, 220V 60Hz 400V 50/60Hz, 440V 60Hz DC power supply: 110V, 220V |
| Allowable Voltage Fluctuation | -20% to +10% |
| Insulation Class | Class B |
| Actuation Time | Brake actuation: 0.1 sec to 0.15 sec Release operation: 0.1 sec to 0.4 sec |
| Ambient Temperature | -10°C to +40°C |
| Standard Coating Color | Munsell 7.5BG 4/1.5 |
- Trolleys
- Hoisting of medium-capacity cranes
- Roller conveyors
- Machine tools
- Process lines
- Traverse/travel of cranes